Netac Basic SO DDR4-3200 16G C22 Memory
Is a 2G x 64-bit (1R8) or 1G x 64-bit (2R16) DDR4-3200 CL22 SDRAM(Synchronous DRAM), non-ECC memory module, based on eight 2G x 8-bit or 1G x 16-bit FBGA components per module. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 260-pin DIMM uses gold contact fingers.
SPECIFICATIONS
- CL(IDD) 19 cycles
- Row Cycle Time (tRCmin) 45.75ns(min.)
- Refresh to Active/Refresh 350ns(min.)
- Command Time (tRFCmin)
- Row Active Time (tRASmin) 32ns(min.)
- Maximum Operating Power TBD W*
- UL Rating 94V-0
- Operating Temperature 0o C to +70o C
- Storage Temperature -40o C to +85o C
*Power will vary depending on the SDRAM used.
FEATURES
- Power Supply: VDD=1.2V Typical
- VDDQ = 1.2V Typical
- VPP - 2.5V Typical
- VDDSPD=2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.18” (30.00mm)
- RoHS Compliant and Halogen-Free
